I might add that it is just the number without the FA or FS or whatever
prefix. Each prefix is used with a certain range of numbers, so Pete
will know what it is without it being supplied to him.
Charlie
Rich C wrote:
> Robert,
>
> There is a number on the square shank of an original boot lock
> assembly which is visible once removed from the car. This will allow
> you to have a key made by Peter Groh. Look up his name info in the
> list archives.
>
> Rich Chrysler
>
> ----- Original Message ----- From: <robertduquette@sympatico.ca>
> To: "Healeys" <healeys@autox.team.net>
> Sent: Tuesday, August 11, 2009 1:36 PM
> Subject: [Healeys] boot key
>
>
>> Did these cars come with 'one' key for the ignition and the boot? I
>> have a
>> numbered cylinder for the ignition and a key that turns it ( without
>> markings
>> ). This same key does not fit in the boot lock. I would like to be
>> able to
>> unlock it. <kidding. I would like to be able to lock it. ;) ) I
>> don't have
>> the car or the BMIHT certificate with me, but I suspect that the
>> number on
>> that cylinder isn't going to match.
>>
>>
>>
>> The short question is, how do I go about getting a key for the boot
>> lock?
>>
>>
>>
>> Robert D.
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as mgcharlie@comcast.net
>
> http://www.team.net/archive
[demime 1.01d removed an attachment of type text/x-vcard which had a name of
mgcharlie.vcf]
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|