healeys
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Healeys] Sealing the fuel sender

from [Alan Seigrist] [Permanent Link][Original]
To: Michael Hartfield <hartfiel@alumni.princeton.edu>
Subject: Re: [Healeys] Sealing the fuel sender
From: Alan Seigrist <healey.nut@gmail.com>
Date: Fri, 7 Aug 2009 10:48:30 +0800 
Michael -

Hylomar or Permatex equivalent.  Do not use any form of silicone, it will
melt into your tank and clog it up.  Don't ask!

Alan

'52 A90
'53 BN1
'64 BJ8


On Fri, Aug 7, 2009 at 9:06 AM, Michael Hartfield <
hartfiel@alumni.princeton.edu> wrote:

> Any ideas what should be used to seal the fuel sending unit in the gas
> tank?
>
> Thanks
> Michael
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Healeys] Sealing the fuel sender, insptwo
Next by Date:  Re: [Healeys] BN6 Sidescreen Restoration, Mirek Sharp
Previous by Thread:  Re: [Healeys] Sealing the fuel sender, insptwo
Next by Thread:  [Healeys] Cute Little Tag from BN6, john close
Indexes:  [Date] [Thread] [Top] [All Lists]