Lin,
A couple of weeks ago a good portion of the list members were heading to
Conclave!
- height from bottom of oil pan to top of T pipe on rocker cover 27"
- length from fan centre to engine back plate 33 1/2"
- length from fan centre to end of propshaft on gearbox/od 64"
- Width from distributor across to air cleaners approx. 25".
Rich Chrysler
----- Original Message -----
From: "Linwood H Rose" <linwoodrose@mac.com>
To: "healeylist" <healeys@autox.team.net>
Sent: Saturday, July 04, 2009 4:05 AM
Subject: [Healeys] healey motor/gearbox measurements
> Hi folks
> I posted this a couple of weeks ago without a response. Thought I would
> try one more time before I give up. Thanks!
>
>
> Does anyone have linear measurements for the engine with usual components
> attached? Or, if there is a document like the frame "blueprint" you can
> refer me to, I would appreciate it. I am looking for things like height
> from bottom of oil pan at lowest point to the top of the rocker cover (or
> the vent "T" pipe on the cover), depth from fan center to engine
> backplate, depth from fan center to end of the gearbox, width of the
> block and width from the air cleaners to the distributor (widest point of
> the assembly).
>
> Thanks for sharing if someone has this information.
>
> Lin
> 1960 BT7 "The Bloody Beast"
> 1959 AN5 Bugeye
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler@quickclic.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|