healeys
[Top] [All Lists]

Re: [Healeys] Heat Barrier Cloth vs Dynamat

To: Douglas Lyon <lyon612@verizon.net>
Subject: Re: [Healeys] Heat Barrier Cloth vs Dynamat
From: m.brouillette@comcast.net
Date: Sun, 28 Jun 2009 18:07:45 +0000 (UTC)
If you are goint to that, don't bother using Dynamat.B  The properties that
make Dynamat would exceltially be lost putting it in upside down.




----- Original Message -----
From: "Douglas Lyon" <lyon612@verizon.net>
To: healeys@autox.team.net
Sent: Sunday, June 28, 2009 1:12:23 PM GMT -05:00 US/Canada Eastern
Subject: Re: [Healeys] Heat Barrier Cloth vs Dynamat

Alan,

"...two sides sticky weather stripping..." to hold the insulation to the
floor? or to the carpet?

I totally agree, that sticking dynamat over the whole floor just isn't the way
to go. B  My thought of perhaps gluing the insulation to the under side of the
carpet suggested itself to me as I recalled how BMW does their carpets. B 
They
mould the entire one-piece carpet to the foam insulation, so that, during
assembly, the whole unit (carpet with foam attached) can just be dropped into
the car---or, conversely, removed from the car later on as one piece (for
those brave enough to ever want to try that). B  Now, of course, a one-piece
moulded carpet is not possible with a Healey, but, gluing the insulation to
the under side of the carpet might be the next best way to go. B  It has at
least one advantage I can think of, in that it would allow all of the carpet,
and all of the insulation, to be easily removed later, if, for example, I
should ever need to pull the transmission, or the engine/transmission. B  What
do you think?

Douglas Lyon
Claremont, CA

'59 BN7

B B ----- Original Message -----
B B From: Alan Seigrist
B B To: Douglas Lyon
B B Cc: Healey
B B Sent: Sunday, June 28, 2009 7:59 AM
B B Subject: Re: [Healeys] Heat Barrier Cloth vs Dynamat


B B Douglas -

B B This is my thinking. B I think possibly some simple two sides sticky
weather
stripping might be good enough to keep the insulation/heat barrier from moving
about, sticking dynamat to the whole floor just doesn't seem right. B Dynamat
is easy to use for the standard shop guy, but a b**ch for the next person on
the next go around...

B B Alan

B B '52 A90
B B '53 BN1
B B '64 BJ8
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>