Yes, however swapping individual gears back and forth is a hole different
story.
Also the 3000 version is more desirable because it has been known that the
main shaft
retainer clip can come off and create some issues in the earlier boxes.
The teeth were
cut in the opposite direction to help eliminate that problem.
However the earlier 28% overdrive is the way to go rather than the 22% from
the 3000 and
they are also interchangeable as a whole.
Mark
----- Original Message -----
From: "Bernard Cristalli" <bcrist@club-internet.fr>
To: "Healey List" <healeys@autox.team.net>
Sent: Friday, June 26, 2009 3:16 PM
Subject: [Healeys] Engines and gear boxes
> Hi listers,
>
> Is it possible to switch a gear box from a 100-6 to a 3000 or vice-versa?
> In other words, are all the 6 cylinders engines able to accept
> indifferently earlier or later gear boxes?
>
> Thanx
> Bernard
> BT7 & BN4
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as lapierrem@sbcglobal.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|