Mark,
I went to a machine/fabrication shop (Farm machine/welding actually) and using
a cardboard "dummy" I made and tested had them laser cut the pieces, which I
then heated and bent, and then filed smooth and had powdercoated.
Cheers.
Jim
From: Mark Schneider
Sent: Wednesday, June 24, 2009 12:46 PM
To: James Sailer
Subject: Re: Subject: [Healeys] Seat Belts
Jim,
Thank you. The design is perfect. I am on my way to Home Depot to get some
stock to fabricate with.
Marks 3
'66 BJ8
On Jun 24, 2009, at 11:43 AM, James Sailer wrote:
Hi Mark,
I did a rear seatbelt arrangement for my BJ8 for when my kids were smaller
(now larger).
Attached some photos. The brackets are self explanatory and were crafter
out of 1/4 inch stock. The seat belts clip into the brackets so they can be
installed when needed.
I've shared this with the list previously and can send to others
interested.
Jim Sailer
66 BJ8 and kids too big for the back seat ....
><((((:> ><((((:> `7.88.74/`7.8.74/`7... ><((((:>
><((((:> ><((((:>
><((((:>
<Dsc00700a.jpg><Dsc00702a.jpg><Dsc00704a.jpg>
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|