healeys
[Top] [All Lists]

Re: [Healeys] Shift boot clamp ring

To: <healeys@autox.team.net>
Subject: Re: [Healeys] Shift boot clamp ring
From: "David Masucci" <drmasucci@comcast.net>
Date: Mon, 22 Jun 2009 21:48:41 -0400
Hi Tom,

I got the ring on. The stem points up and the ring fits over the stem from 
the top. I put the ring on the rubber stem first, then slid the boot down 
onto the shifter. When you look at the rubber stem it now has a chrome ring 
around it.

Dave


----- Original Message ----- 
From: <tomfelts@windstream.net>
To: "David Masucci" <drmasucci@comcast.net>; <healeys@autox.team.net>
Sent: Monday, June 22, 2009 9:23 PM
Subject: Re: [Healeys] Shift boot clamp ring


> Now you have me confused.  If you put the ring on first, then the shift 
> boot with the end pointing up, how do you get the ring on?  Seems the only 
> way it will fit is pointing down and then you can't see the ring.
>
> tom
> ---- David Masucci <drmasucci@comcast.net> wrote:
>> Hi Bob,
>>
>> Yea I have had the stem pointing both up and down. I like it up. I'll 
>> give
>> your suggestion a try.
>>
>> Thanks,
>> Dave
>>
>> ----- Original Message ----- 
>> From: "Bob Spidell" <bspidell@comcast.net>
>> To: "David Masucci" <drmasucci@comcast.net>
>> Cc: <healeys@autox.team.net>
>> Sent: Monday, June 22, 2009 8:35 PM
>> Subject: Re: [Healeys] Shift boot clamp ring
>>
>>
>> > Hi Dave,
>> >
>> > I have one on my shift lever boot.  It'll fit if you put it over the 
>> > stem
>> > on the boot before sliding the boot over the shift lever.  It helps to 
>> > put
>> > a little silicone oil on the lever beforehand.
>> >
>> > This'll bring up the old 'stem up or down' discussion.  It's probably
>> > supposed to be down, but why bother chroming the ring if you can't see 
>> > it?
>> > Anyway, in my experience the boot lasts a LOT longer with the stem up.
>> >
>> >
>> > Bob
>> >
>> >
>> > David Masucci wrote:
>> >> My BJ8 shift boot was getting a little ragged, so I decided to buy a 
>> >> new
>> >> one from Moss. I hadn't noticed it before, but Moss shows a "chrome 
>> >> ring"
>> >> for the "shift lever grommet". So I decided to get that ring too. I 
>> >> had
>> >> assumed that it slips over the stem of the shift boot around the shift
>> >> lever. But the ring is simply too small for that to be right. What is
>> >> this chrome ring for and where does it go?
>> >>
>> >> Thanks,
>> >> Dave
>> >> BJ8
>> >
>> > *******************************************************************
>> > Bob Spidell           San Jose, CA            bspidell@comcast.net
>> >
>> > *******************************************************************
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>>
>> Healeys@autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> You are subscribed as tomfelts@windstream.net
>>
>> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>