Re: [Healeys] exhaust header

["Steve B. Gerow" <steveg@abrazosdata.com>]

Re: installing header on head studs.

If necessary, you can replace some of the head studs with 1-1/4" long 
socket-head set screws - these can be inserted with the manifold loosely in 
place. This might help on the DW install - worked on my Kirk/DMD install.

--
Steve Gerow 
BN6
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive