Hi Jon
Went through this problem last Spring and if you go to these web
address's this is what i did with offset bushings. I used a level
http://picasaweb.google.com/bj7healey/FrontEndAlignment20080812#
http://picasaweb.google.com/bj7healey/MyHealyAlignment#
Bob 1963 BJ7
On Tue, 2009-04-21 at 11:50 -0400, STOCKLAND@aol.com wrote:
> Is there a simple way to check the toe in, toe out adjustment on the 3000
> Healey?
>
> Thanks,
>
> Jon
> **************A Good Credit Score is 700 or Above. See yours in just 2 easy
> steps!
>
>(http://pr.atwola.com/promoclk/100126575x1221621490x1201450102/aol?redir=http:%2F%2Fwww.freecreditreport.com%2Fpm%2Fdefault.aspx%3Fsc%3D668072%26
> hmpgID%3D62%26bcd%3DAprilfooter421NO62)
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as bj7ah@acanac.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|