Brad - the sensor should not be loose. I used a hot water seal washer
from the hardware/plumbers and coated it liberally with permatex
copper, then bolted it in the motor. It hasn't leaked in 20 years.
On 4/16/09, mailmaineguide.com <info@atteanlodge.com> wrote:
> List: I just installed a new oil pressure/temp gauge in the healey rebuild.
> Even though I have the backing nut firmly tight the sensor itself is still
> slightly loose, obviously, the best way to tell if it will leak is to fill
> the
> radiator but I am too much a coward to do it, I need someone to tell me that
> it is perfectly normal for the sensor to be loose or am I missing
> something???
> Many thanks.
>
> Brad Holden
> 67 BJ8 soon to be running (I hope)
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut@gmail.com
>
> http://www.team.net/archive
>
--
Sent from my mobile device
Alan
'52 A90
'53 BN1
'64 BJ8
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|