Bob Spidell .. We have these teflon bush , see page 24 in Our Rare Parts
Catalog The catalog can be down loaded from our
www.BritishCarSpecialists.com Norman Nock
--- On Wed, 4/15/09, Bob Spidell <bspidell@comcast.net> wrote:
From: Bob Spidell <bspidell@comcast.net>
Subject: Re: [Healeys] Carb Bush Removal - HD6 ??
To: "Alan Seigrist" <healey.nut@gmail.com>
Cc: tomleavy@comcast.net, Healeys@autox.team.net
Date: Wednesday, April 15, 2009, 7:15 AM
The HD8 carbs on my BJ8 have brass bushings with a teflon sleeve. Is someone
selling teflon bushings?
Bob
Alan Seigrist wrote:
> Tom -
>
> Have you tried a PTFE bushing in there instead of bronze? HD8 carbs use
PTFE
> bushings and they really make a big difference - the shafts never wear and
> it is easy for me to get a rock steady idle at all temps on my HD8s.
>
> Was thinking this might be a better, longer lasting option.
>
> http://www.mcmaster.com/#2639t7/=1gd3of
>
> I was thinking of just buying some of these, and then having them bored out
> to 5/16" at a machine shop.
>
> Alan
>
> '52 A90
> '53 BN1
> '64 BJ8
>
>
> On Tue, Mar 3, 2009 at 6:24 AM, <tomleavy@comcast.net> wrote:
>
>> Sorry, forgot to paste the link:
>>
>> http://www.chicagolandmgclub.com/driveline00/1001/jasw.html
>>
>> Tom
>
*******************************************************************
Bob Spidell San Jose, CA bspidell@comcast.net
*******************************************************************
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
You are subscribed as sjnnock@sbcglobal.net
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|