Hi Alan-
Great idea. I should have searched their inventory a little harder. I haven't
replaced the bushes yet, and I'll definitely use the teflon instead. Thanks for
your input
Thomas Leavy
451 Branchport Ave
Oceanport, NJ 07757
908-433-9322
----- Original Message -----
From: "Alan Seigrist" <healey.nut@gmail.com>
To: tomleavy@comcast.net
Cc: Healeys@autox.team.net
Sent: Wednesday, April 15, 2009 7:33:43 AM GMT -05:00 US/Canada Eastern
Subject: Re: [Healeys] Carb Bush Removal - HD6 ??
Tom -
Have you tried a PTFE bushing in there instead of bronze? HD8 carbs use PTFE
bushings and they really make a big difference - the shafts never wear and it
is easy for me to get a rock steady idle at all temps on my HD8s.
Was thinking this might be a better, longer lasting option.
http://www.mcmaster.com/#2639t7/=1gd3of
I was thinking of just buying some of these, and then having them bored out to
5/16" at a machine shop.
Alan
'52 A90
'53 BN1
'64 BJ8
On Tue, Mar 3, 2009 at 6:24 AM, < tomleavy@comcast.net > wrote:
Sorry, forgot to paste the link:
http://www.chicagolandmgclub.com/driveline00/1001/jasw.html
Tom
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|