Wes: To answer your question, I believe that my Healey is original in this
area. It has always been just the Phillips head screws. No finishing
washers.
(The Other) Len
Vacaville, CA, USA
1967 AH 3000 MkIII, HBJ8L39031
----- Original Message -----
From: "Weston Keyes" <westonkeyes@hotmail.com>
To: "Ahealey Ahealey" <healeys@autox.team.net>
Sent: Thursday, April 02, 2009 5:12 AM
Subject: [Healeys] Fasteners securing cardboard fuel filler pipe BJ8 ?
> Hello Folks,
>
> This is a niggly point, I know
>
> What fasteners arre correct for holding the cardboard panel over the
> filler
> pipe in the boot of a late BJ8? The Concourse guidelines say: "secured
> with
> chrome Phillips pan head screws". My vendor went me chrome oval head
> screws
> with finishing washers for this application. Any originals out there?
>
> Thanks
>
> Wes Keyes
> York,Maine
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as thehartnetts@earthlink.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|