Gary,
The 3000 BT7/BN7 and Tri-Carb part number is AHB9048.
When this part became "no longer available" the replacement part number was
the part number for what you list for the BJ7/BJ8.
My parts book is the Fifth Edition, undated.
I believe the supporting brackets slide onto the copper tube and are not
brazed, but simply act as a clamp once the fastening nuts are tightened.
Ron
-----Original Message-----
From: healeys-bounces@autox.team.net [mailto:healeys-bounces@autox.team.net]
On Behalf Of Warthodson@aol.com
Sent: Wednesday, March 25, 2009 11:32 AM
To: healeys@autox.team.net
Subject: [Healeys] Tri-Carb heater pipe
I have noticed that some photos (Anderson/Moment book, Pg.87 & 88) show the
temperature capillary tube on the valve cover side of the hot water pipe
while other photos (Clausager book, Pg. 57) show the capillary on the
carburetter
side of the hot water pipe. The two steel brackets that support the copper
heater tube must be brazed onto the valve cover side in the first case &
onto
the carb. side in the second case. I don't have assess to a Tri-Carb parts
book. Can someone tell me if the Tri-Carb heater pipe has a unique part
number
for this part? FYI, the BJ7/8 part #is AHB9249.
Thanks,
Gary Hodson
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|