I think people usually assemble the A-arms (wishbones) to the stub axle
before fitting both to the chassis and shock arms. There is a specific
procedure for setting the clearance between the A-arms and the end caps
on the stub axle fulcrum (bottom of the king pin). Then, the springs go in.
Wheels go on last ;)
Bob
Simon & Christine Atkinson wrote:
> What's the best method for re-assembling the front suspension, wishbones and
> wheels? I've mounted the shocks, wishbones and sway bar - but that's it for
> now.
>
> Any advice would be appreciated.
>
> Thanks,
>
>
>
> Simon
>
>
--
*******************************************************************
Bob Spidell San Jose, CA bspidell@comcast.net
Failure is the opportunity to begin again more intelligently. -
Henry Ford
*******************************************************************
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|