Keith -
According to Gary Anderson & Roger Moment's book, cars starting with
C149930 had rails on the driver's side. Rails were only put on the
passenger's side as an option.
Note - I am 6'1" tall and the rail in my BN1 sits me a little too
high. In addition, the driver's seat back now interferes with the
soft top when it is down. I put the rail in my early BN1 when I
didn't know any better, although originally it didn't have them. I
will be taking the rail out soon.
Alan
On 2/14/09, Keith Bailey <keithbailey5@bigpond.com> wrote:
> Hi All
> Seat mountings for BN1
> I understand the early BN1 had fixed mountings for both seats, then a
> sliding
> mount for drivers seat and latter sliding on both seats at what stage was
> the
> modification carried out my BN1 chassis no is152199 Feb 54
> Regards Keith
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut@gmail.com
>
> http://www.team.net/archive
>
--
Sent from my mobile device
Alan
'52 A90
'53 BN1
'64 BJ8
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|