Rich, can I see the pics? Did you put the panel under the driver's seat? I
have the panel for underneath in the kit I bought, but not sure how to mount
it.
Mike MacLean
56 BN2
60 AN5
On Fri, Jan 16, 2009 at 7:29 PM, Ghess4 <ghess4@cox.net> wrote:
> Hi Rich,
> Thanks again for sending the pictures of your insulation panels. That is
> the way I will go. As many others are, I'm sure, I'm very grateful for
> your expert help and learn a great deal from your responses to others
> questions.
> Gale Hess
> ----- Original Message ----- From: "Rich C" <richchrysler@quickclic.net>
> To: "Ghess4" <ghess4@cox.net>
> Sent: Thursday, January 15, 2009 7:18 PM
> Subject: Re: [Healeys] Heat insulation
>
>
> Hi Gale,
>> Here's the latest job I've been assembling, showing the early stages of
>> inner detailing, including the insulation panels. This is a '64 Phase 1
>> BJ8.
>>
>> Rich
>> ----- Original Message ----- From: "Ghess4" <ghess4@cox.net>
>> To: "Rich C" <richchrysler@quickclic.net>; <healeys@autox.team.net>
>> Sent: Thursday, January 15, 2009 1:38 PM
>> Subject: Re: [Healeys] Heat insulation
>>
>>
>> Thanks Rich,
>>> I've put a new frame under my BJ8 and after sand blast, undercoat and
>>> paint it looks so good that I hate to cover it up!! Guess I'll just
>>> drive
>>> it without the outer panels!! (ha) I've used the stuff that looks just
>>> like the asbestos but it doesn't look professional to me no mater how
>>> good
>>> I fit the panels around the foot well.
>>> Thanks again.
>>> Gale Hess
>>>
>>> ----- Original Message ----- From: "Rich C" <richchrysler@quickclic.net>
>>> To: "Healeys" <healeys@autox.team.net>; "Ghess4" <ghess4@cox.net>
>>> Sent: Wednesday, January 14, 2009 7:27 PM
>>> Subject: Re: [Healeys] Heat insulation
>>>
>>>
>>> Asbestos insulating panels were used on the engine side of the left
>>>> footwell right from the earliest preproduction Hundreds.
>>>> The earliest were somewhat smaller and didn't cover as well, but were
>>>> there never the less.
>>>>
>>>> Rich Chrysler
>>>>
>>>> ----- Original Message ----- From: "Ghess4" <ghess4@cox.net>
>>>> To: <healeys@autox.team.net>
>>>> Sent: Wednesday, January 14, 2009 8:17 PM
>>>> Subject: [Healeys] Heat insulation
>>>>
>>>>
>>>> Can anyone tell me whether the insulating panels on the foot well in
>>>>> the
>>>>> engine compartment were installed on the early healeys or was that
>>>>> something
>>>>> that was added later?
>>>>>
>>>>> Thanks
>>>>> GHess
>>>>> _______________________________________________
>>>>> Support Team.Net http://www.team.net/donate.html
>>>>>
>>>>> Healeys@autox.team.net
>>>>> http://autox.team.net/mailman/listinfo/healeys
>>>>>
>>>>> You are subscribed as richchrysler@quickclic.net
>>>>>
>>>>> http://www.team.net/archive
>>>>>
>>>> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as rrengineer@dslextreme.com
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|