I am in the process of removing the starter from my BJ8 so far I have removed
all cable connections from the solenoid plus removed the top bolt.
The problem is the bottom bolt. Do I need to elevate the car in order to have
access to the nut for the bottom bolt? Access to the bottom bolt head is no
problem since I removed the transmission tunnel cover. Any advice will be
greatly appreciated.
Second question: Is the solenoid grounded by being fastened to the chasis? I
found that the solenoid had come loose from frame and was wondering if this may
be the cause of my inop starter.
Thanks
Jorge Garcia
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|