If you look on the back side of the nut there is a length stamped
there in feet and inches.
David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767
www.britishcarspecialists.com
.
.
On Oct 12, 2008, at 5:10 PM, John Loftus wrote:
> Does anyone have a spare water temp/oil pressure gauge that they
> could measure the length of the spiral protected capillary tube?
>
> I had mine rebuilt months ago and when installed can only manage
> one small loop (less than 2" dia.) in front of the firewall. And
> thats with the rest of the line going in a straight line from back
> of gauge to the firewall opening.
>
> I know it's too short but would like to double check the proper
> length before calling them.
>
> BTW, The concours book says the copper tube should be zinc plated.
> I requested that mine be zinc plated but the vendor said they have
> never had this request before (and did not zinc plate it). Who's
> right? (vendor is Moma .. not some unknown source).
>
> Cheers,
> John
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healeydoc@sbcglobal.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|