healeys
[Top] [All Lists]

Re: [Healeys] Grose-jets

To: "James Shope" <healeymanjim@hansencc.net>
Subject: Re: [Healeys] Grose-jets
From: "Alan Seigrist" <healey.nut@gmail.com>
Date: Wed, 8 Oct 2008 13:43:38 +0800
Jim -

I got a bad batch of Grose Jets a while back that did this.  I chucked 'em.

Not sure if the new ones do this too.

The old ones they made like 15 years ago worked like a dream, don' t know
what happened.

FYI, the grose jets are VERY sensitive to crud in the fuel.  You must use a
proper inline fuel filter with them.

Alan

'52 A90
'53 BN1
'64 BJ8


On Wed, Oct 8, 2008 at 11:54 AM, James Shope <healeymanjim@hansencc.net>wrote:

> have a tri-carb that i am trying to get running right after it has sat for
> a
> year.  the varnish has been cleaned out of the carbs but having carb
> problems.
> seem the grose jets keep stopping up when the ball is pushed up to close
> them.
> i can tap the ball down, but the jet still is plugged up. it takes lots of
> air
> pressure to open them up.  i have no idea what is causing this, but am
> going
> to replace the grose with viton tipped needles.  anyone else have this
> problem?   healeymanjim
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut@gmail.com
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>