Sam -
Early BN1s had adjustable steering. If so just loosen the grub screws
on the steering hub and you can partially pull out the trafficator.
If you have fixed steering, you have to first loosen the olive nut at
the front of the stator tube on the front of the steering.
Either way you don't need to pull the steering wheel, just don't pull
the traff wires too far into the stator tube unless you tie a string
to them so you can pull it through later.
Alan
On 9/28/08, Sam DeSalvo <sdesalvo@frontiernet.net> wrote:
> Do you have to pull the steering column to get at the wires under the horn
> button on a BN1? My horn doesn't work, only right turn signal works, so I
> suspect the traffiicator. Any enlightenment on the subject? Can't find
> anything in the archives.
> Thanks in advance,
> Sam
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut@gmail.com
>
> http://www.team.net/archive
>
--
Sent from my mobile device
Alan
'52 A90
'53 BN1
'64 BJ8
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|