Fellow Healeyoids,
Again, thanks for the pics Rich. These help immensely. Also thanks to all
who helped. I guess that the carpet will always be somewhat rumpled. I
also guess that the adhesive properties of Velcro will exceed the adhesive
properties of the glue to hold it down. I will futz around with the snaps
some more I suppose. I'm tempted to glue the carpet to the tunnel but I
know that I will have to remove it. It is so frustrating. I just want to
drive my Healey before the snow flies.
Randy
Healey Archaeologist
>
> 63 BJ7
> 60 BT7
> 66 Cobra replica
> 06 Mini Cooper S
-----Original Message-----
From: Rich C [mailto:richchrysler@quickclic.net]
Sent: Wednesday, September 24, 2008 11:10 PM
To: Randy Dickson; healeys@autox.team.net
Subject: Re: [Healeys] gearbox tunnel carpet fastening
Randy,
First of all I should state up front that the original centre shift tunnel
carpet didn't fit very well either, too many lumps, bumps and contours. That
said, you should be able to get a reasonable fit with the Heritage kit and 4
snaps down each side.
Here are 4 pictures of Heritage's Karvel carpet fitted to a centre shift
tricarb, which has the same centre shift gearbox cover as your BJ7, and this
car achived a Gold Concours award when finished. Note the arm rest pad had
not been sewn into place when these pictures were taken.
Rich Chrysler
----- Original Message -----
From: "Randy Dickson" <rdickson@midwestarchaeology.com>
To: <healeys@autox.team.net>
Sent: Wednesday, September 24, 2008 10:03 PM
Subject: [Healeys] gearbox tunnel carpet fastening
> Fellow Healeyoids,
> I'm in the middle of installing a Heritage carpet kit on my 63 BJ7. I'm
> having a hell of a time getting the gearbox tunnel carpet to fit the
> contours of the tunnel.. I have to put the snaps in the carpet and I keep
> having to remove and move them over a 1/4 inch here or a 1/2 inch there to
> get the carpet tight. I have given up on the snaps totally and have
> already
> wasted too much time on them. I will not revisit that no matter what. It
> is real bitch! Anyway, I had a thought about installing Velcro to the
> carpet back and on the dynamat which is on the tunnel and floor. Has
> anybody done this and does it work? Thanks!
>
> Randy
>
> Healey Archaeologist
>
> 63 BJ7
> 60 BT7
> 66 Cobra replica
> 06 Mini Cooper S
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|