After reading John's mail I recalled seeing these adapters in Holden Vintage
& Classic's catalogue - go to
http://www.holden.co.uk
and search item 040.001
Cheers
Peter
----- Original Message -----
From: "John Harper" <ah@jharper.demon.co.uk>
To: "Alan Seigrist" <healey.nut@gmail.com>
Cc: "Healey" <Healeys@autox.team.net>
Sent: Tuesday, September 23, 2008 5:32 AM
Subject: Re: [Healeys] BN1 - Wiper Arm Advice (A90)
> Alan
>
> You might have difficulty in finding these but service parts were
> available that adapted the plain shaft to a serrated fitting as on the
> BN2 and beyond. This allowed later arms to be fitted to earlier cars.
>
> The benefit of these was that they were clamped onto the plain shaft by
> screws in the side of the adapter. With these it was possible to file
> flats in the plain shaft if the screws were not enough on their own.
>
> Regards
>>
>>My A90 has essentially the same wiper spindles as the BN1, and it is
>>miserable!! Actually, these questions apply to my BN1 as well so here
>>goes...
>>
>>1) The spindles are round and smooth which makes it next to impossible for
>>the wipers arms to hold on to them without eventually coming loose after
>>just a couple of uses and sticking in some useless position on the
>>windshield when being used in the rain. This is both very embarrassing to
>>have wipers stuck in random positions on the windshield when it is
>>raining,
>>but also frustrating that the windshield isn't being wiped clear of rain
>>drops! Has anyone come up with a good solution for making sure the wiper
>>arms stick to the wiper spindles without coming loose? Any suggestions
>>welcome. My cars are daily drivers and I do actually enjoy driving in the
>>rain (shame on me!).
>>
>>2) The spindles are supposed to have rubber seals on them. Does anyone
>>make
>>these? Maybe Scott's Old Rubber Co...?
>>
> --
> John Harper
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|