Hi Ed
Sorry to be so long answering as have been away working
I have the complete front end off the BT7, simply bolts on-Must use BT7
stub axles to mount the calipers,as well as BT7 spindles. BN1 Control arms
are ok, as is the king pin
I originally had the BJ8 front end, but decided I wanted the bigger brakes
on the BT7 so did a swap one day.
Sorry I dont have photos
Regards
John
----- OriginalMessage -----
From: "E.A. Driver" <edriver@sasktel.net>
To: "John & Kerry Rowe" <jkrowe46@bigpond.net.au>
Sent: Wednesday, September 17, 2008 7:06 AM
Subject: Re: [Healeys] Brake power boosters -OFF the LIST
>
> Hello John
>
> Would you happen to have a few photos of the disc rake set up on your
> BN1. I am
> thinking of adding disc brakes at all four corners - the rear are very
> straight forward
> but I have have problems resolving the fronts.
>
> Kind regards
> Ed
> Saskatoon, Saskatchewan, Canada
> Historian, AHCUSA
> '53 Bn1 '65 BJ8 '89 Morgan 4/4
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|