healeys
[Top] [All Lists]

Re: [Healeys] 6 Volt Battery Tray Mounting

To: "Rich C" <richchrysler@quickclic.net>, "stevesylvia2"
Subject: Re: [Healeys] 6 Volt Battery Tray Mounting
From: "Mark LaPierre" <lapierrem@sbcglobal.net>
Date: Sat, 13 Sep 2008 08:48:20 -0400
Wow,  it sure is great when new folks on the list can get good , how to 
advise like this with out
a gosh darn SALES PITCH.

HE SAID HE ALREADY HAS THE  PARTS.  He just wants advise.

No names necessary I'm sure.   Not you of course Rich.

Mark


----- Original Message ----- 
From: "Rich C" <richchrysler@quickclic.net>
To: "stevesylvia2" <stevesylvia2@comcast.net>; <healeys@autox.team.net>
Sent: Friday, September 12, 2008 10:39 PM
Subject: Re: [Healeys] 6 Volt Battery Tray Mounting


> Hi Steve,
>
> On the BN6 and BN7 two seaters they of course were originally fitted with
> twin 6 volt batteries. The trays simply sit on the support brackets. The
> batteries sit in the trays. There are a pair of J shaped rods whose lower
> ends of the hooked J fit into slotted brackets welded to the frame. The 
> rods
> run up through the holes in the bottom of the trays, and through the 
> moulded
> top flanges of the batteries, then rubber flat washers, steel flat washers
> and nuts tighten gently against the top of the battery flanges. With the
> batteries securely fastened in place, the trays won't move.
>
> Rich Chrysler
>
> ----- Original Message ----- 
> From: "stevesylvia2" <stevesylvia2@comcast.net>
> To: <healeys@autox.team.net>
> Sent: Friday, September 12, 2008 10:07 PM
> Subject: [Healeys] 6 Volt Battery Tray Mounting
>
>
>> Hi all,
>>
>>            Got a question about 6 volt battery mounting.  I'm in the
>> middle
>> of the re-assembly portion of a frame off restoration of my BN7 and it's
>> getting time to mount my batteries.  I've got the new aluminum battery
>> trays
>> but I don't know how they were affixed to the support mounts.  I see no
>> previous weld marks and no screw holes.  I've got two buddies in my car
>> club
>> who also have BN7's but they either bought the car or changed to one 12
>> volt
>> years ago so they were no help.  Does anybody know how the trays were
>> affixed to the supports and batteries held in the trays?  Any help would
>> be
>> great!
> Regards,
> Steve Meyer
> 1961 BN7 3000
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as lapierrem@sbcglobal.net
>
> http://www.team.net/archive 
_______________________________________________
Support Team.Net http://www.team.net/donate.html

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys


http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>