240-Z muffler, did it on my tri-carb1998, still sounds wonderfulllllll to
me.
2in/2out, approx 2"-3" shorter than stock, 1/4" to 3/8" flatter fits just
fine, more ground clearance.
Kirk
----- Original Message -----
From: "Bob Spidell" <bspidell@comcast.net>
Cc: <Healeys@autox.team.net>
Sent: Sunday, September 07, 2008 4:50 PM
Subject: Re: [Healeys] exhaust system
>I cobbled together an exhaust from glasspacks bought from J.C. Whitney
> with the pipes from an Ansa whose mufflers were shot. My welding isn't
> too pretty but it sounds pretty good; interestingly, it's louder at low
> speeds than at highway speeds. The mufflers are smaller diameter than
> the Ansa's so give me a wee bit more clearance.
>
>
> bs
>
>
> Ron Davies wrote:
>> If you want rich and deep you get "glass packs" like I had in the 60's on
>> my
>> BJ8 but I don't know if they are legal anymore. The stainless I have on
>> my
>> current BJ8 are really tame but then the neighbors don't mind.
>>
>> Ron Davies
>> SoCal
>> 67 BJ8
>> ---------------------------------
>> presently i have a abarth exhaust on my bj8 and it doesn't have that deep
>> sound of a ansa like on my tr6 anyone have a custom exhaust that gives
>> that
>> rich deep sound
>> _
>>
>
>
> --
> *******************************************************************
> Bob Spidell San Jose, CA bspidell@comcast.net
> *******************************************************************
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as 62bt7@prodigy.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|