I am in the process of aligning doors and door latches. Its been years since
I dismantled this stuff so the correct latch position is a question to me.
The door jam "chrome latch" has a notch and a large hole in the center.
The door mechanism has a small piston that inserts into the door jam latch to
hold the door shut.
Is the center hole supposed to be the home position for the piston or the
notch? I can't really see a lot of wear at the hole position but a lot of
wear at the notch.
Hope this is clear enough.
Mark
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|