Peter and Alan
The measurement I have recorded for an original cable is
Shoulder to shoulder on the outer = 29 9/16". I am not sure what your
880mm refers to but as this comes out around 34 3/4" this seems to me to
be too long for a 100.
The part numbers are different. For example
100 1B 7361
3000 11B 5338
BMC did not change part numbers without reason and 1B 7361 went
'obsolete' and not 'superseded by' as it could have been if the later
part were suitable.
Regards
>
>That's an AH Spares part number. You can look it up on their website
>and confirm if it's the right one.
>
>If I'm not mistaken the cable is the same for all big healeys. I am
>sure AH Spares will swap it if there's any problem, they are a pretty
>fair lot.
>
>Best,
>
>Alan
>
>On 9/5/08, Peter Linn <greylinn@ozemail.com.au> wrote:
>> G'day list
>>
>> Can anyone tell me the length of a BN1 handbrake cable (overall length of
>> the
>> outer casing to the ends of the threaded portions)? I have a brand new one
>> that came with my BN1 project car, but it appears to be too long - it's
>> 880mm
>> on the outer casing. The cable has a "Made in England" sticker and a number
>> BRK225.
>>
>> Cheers
>>
>> Peter Linn
--
John Harper
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|