Randy.
I have the original dash top panel for my BN7 II. The plywood is
flush with the 1/2 round foam part. The original padding was not foam,
but appears to be a material similar to the original carpet under-
felt, but is about 1/8" thick.
I think that if you stop the foam at the edge of the 1/2 round you
will be able "read" the edge.
I can send a picture if you like.
I'm going to take a look at using the white closed cell high density
foam. usually called "Landau foam.
Best
Dave and Daisy
On Jul 9, 2008, at 10:30 PM, Randy Dickson wrote:
> -----Original Message-----
> From: Randy Dickson [mailto:rdickson@midwestarchaeology.com]
> Sent: Wednesday, July 09, 2008 7:58 AM
> To: 'healeys@autox.team.net'
> Subject: dash top padding question
>
>
>
> Fellow Healeyoids,
> I got a kit from Heritage and I'm in the process of putting the
> dashtop on
> my 63 BJ7. Does the 1/4" foam go all of the way over the half round
> rubber
> front of the dash top and glue under the dash top? When I took my
> old one
> apart the foam appeared to go over the half rounded rubber front but
> the
> dash had been redone by the PO at least once. Thanks!
>
>
> Healey-Archaeologist
> Randy
>
> 63 BJ7
> 66 Cobra replica
> 06 Mini Cooper S
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as quenty@ntelos.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|