Mike -
I would almost be certain that when they designed the head they ran
into a problem with the water gallery / head bolt connections with the
block and balancing that with giving the head enough strength not to
crack, probably the easiest solution was to make the port taller and
square rather than round. Remember they made these when round or
square would have made no difference in the power output of these
cars.
Alan
- Original message -
Well, my question about square exhaust port holes ...
On 7/1/08, Michael Gladwin <michaelgladwin@mac.com> wrote:
> Well, my question about square exhaust port holes met with (almost)
> complete silence. Surely someone knows? Not that it is important.
> I'll try with a second question more relevant to present repair work.
> What rate piston spring should be in a tri-carb carb. I think it is
> red (4 1/2 oz). Can anyone help or are you all burbling over to San
> Diego and over-indulging in Dos XX?
>
> Mike Gladwin
> BT7 II
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as healey.nut@gmail.com
>
> http://www.team.net/archive
>
--
Sent from Gmail for mobile | mobile.google.com
Alan
'52 A90
'53 BN1
'64 BJ8
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|