OK, so they're made to the original specs. Is this disclosed on the
front end?? If I spent that much money I'd be disappointed to have to
finish off the job myself. Just my 2-cents-worth.
Jack
-----Original Message-----
From: healeys-bounces+jnbrashear=garverengineers.com@autox.team.net
[mailto:healeys-bounces+jnbrashear=garverengineers.com@autox.team.net]
On Behalf Of Rich C
Sent: Tuesday, June 10, 2008 8:09 AM
To: Healey Bruce; David Schweninger; Ron Fine; HealeyMail List
Subject: Re: [Healeys] Seat pans
>> I bought a complete Heritage Interior. The seat foams are not molded
>> correctly. If you fit the foam into the seat pan so it fits correctly
>> across the front, there is about a 1 1/2 gap at the back. If you pull
>> the cover down over and under the seat pan you'll have about a 1 to 2
>> " gap.
>> Heritage is well aware of the problem. I guess new tooling for the
>> seat foam is too expensive.
>> So their recommendation is to stuff whatever you have handy into the
>> space until the gap is filled.
The rest of the story.......
The seat foams are in fact moulded more correctly than you would
imagine. If
you've ever dissected an original seat, you would see that the original
foams are the same length. However, BMC employed skilled trimmers who
literally stuffed the rear area of the cushion with bits of whatever to
fill
in the gap at the back as required. We've seen extra foam, wads of
cotton
gauze, even bits of carpet, to do the job on original seats.
If BMC had used full sized and thickness of moulded foam there, the
individual seat back vs. cushion assemblies would have bound and fought
each
other so the seat back would not be able to come to rest where it should
on
the rear of the frame.
Heritage does a similar practice when they build up their seats in
house.
That way the seat you have them assemble for you will have the fit
required.
And that is why I always have Heritage build the seats for me. We mere
mortals usually don't have the skills and knowledge those trimmers had
to do
a first class job on what is likely to be the only set we ever build in
our
lifetime. And all to save a few dollars......
Rich Chrysler
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
You are subscribed as jnbrashear@garverengineers.com
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|