Try tightening up the bleed screw as the other person is still depressing
the pedal, ie pedal is on its last downward stroke and you tighten up before
pedal hits bottom. Sometimes a little air gets sucked back when the stroke
has finished.....so you get 95?% of the air out of each line, but never the
last 5%. There's something in my BMC manual to that effect. I always used to
get hung up that way. Or get a set of those one way valved bleed screws
whose name I've forgotten!
Simon
-----Original Message-----
From: healeys-bounces+simon.lachlan=homecall.co.uk@autox.team.net
[mailto:healeys-bounces+simon.lachlan=homecall.co.uk@autox.team.net] On
Behalf Of kaynmike.bham@juno.com
Sent: 08 June 2008 01:58
To: Healeys@autox.team.net
Subject: [Healeys] (no subject)
Everything new on brake system of kid's AN5. Bled and bled only to have
pedal
remain "spongy." Anyone with ideas? Hint: we have been told that the M/C is
BELOW the wheel cylinders-is that right??
Mike Gougeon 56BN2
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
You are subscribed as simon.lachlan@homecall.co.uk
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|