In a message dated 5/14/08 9:37:09 PM, healeys-request@autox.team.net writes:
> To install a power outlet, such as for charging a cell phone, in a car with
> a positive ground electrical system, is it simply a matter of running a wire
> from the positive post on the power outlet to a adequate ground, running a
> wire from the negative post on the power outlet to a "hot" wire such as one
> of the terminals with a white wire on the ignition switch, and then
> isolating the metal portions of the power outlet body from touching any
> metal parts on the car?
>
Here's my opinion and I'm sticking to it: If you're violating originality by
installing a power outlet, then do it properly and first convert your car to
negative ground. It's just too easy to screw something up, make a bad contact,
and fry an otherwise good piece of electronic gear, which can go from a little
expensive to very expensive.
Cheers
Gary
**************
Wondering what's for Dinner Tonight? Get new twists on family
favorites at AOL Food.
(http://food.aol.com/dinner-tonight?NCID=aolfod00030000000001)
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|