>From all of your valuable input and advice I see that it is not proper to
cinch down the frame during hauling. I like the idea of using the knock off
and after more research I am leaning toward using the knock offs with a loop
and cinching them down with a trailer wench I found on E-trailer.
http://www.etrailer.com/pc-fhtd~E52809.htm If you buy the sliding rail that
the wench fits into and weld it to the side of the trailer you can slide the
wench forward and backward to fit the wheel base of any car. Does anyone see
a problem with this method? Thanks again. JL
PS. BTW E-trailer is the best site I have found if you plan to build or
modify your trailer. http://www.etrailer.com/trailer-parts.aspx
James Lea
PO Box 25
Rockport Maine 04856
1-207-236-3632
1951 Triumph Renown
1952 MG TD
1952 Triumph Mayflower
1958 Rover P4
1962 Austin Healey BT7
1966 MGB
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|