Don,
I had the same deal several years ago with my BN7 resto. I chose to replace
the new sockets with the orig ones. Bulbs fit much better and I thought it was
just a good idea to have orig sockets.
Keith Pennell
> HI List does anyone have any past experence with new wiring harness?I bought
>a new harness from British Wiring in IL.2 years ago.I'm just now puting my
>67BJ-8 back together.I'm now doing the dash wiring.I thought I would install
>new bulbs for all the dash lights into my new wiring harness bulb houlders.I
>bought new bulbs from moss.the box was from the UK.When I try to screw in the
>bulbs to the new bulb houlders in the new wiring harness the bulbs just spin.I
>screw them into the old wiring harness bulb sockets and they screw down
>tight?Is there a larger base bulb that I can use? Or should I cut off they
>new harness bulb sockets and solder my old ones on?Any thoughts?
> Don
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|