William,
With the gearbox cover and vertical bulkhead panel removed, you should be able
to go straight up with a long thin screwdriver from beneath the latch assembly
and fiddle the male striker pin in the sliding latch aperture until the
striker pops free. A small mirror will be necessary so you can see what
you're doing. I've been there more than once and this always worked.
Rich Chrysler
----- Original Message -----
From: William Berg
To: Rich C ; healeys@autox.team.net
Sent: Thursday, March 27, 2008 2:25 PM
Subject: Stuck hood striker
Rich. It is still stuck. It looks like I will have to unbolt it from behind
the heater. It make take a few times before its right but thats
the real reson we grin when we drive these cars , ...All that we have
overcome to be on the road , the pride of getting it , eventually, right
-William
----------------------------------------------------------------------------
-----------------------------------------------------------------------------
-
In a rush? Get real-time answers with Windows Live Messenger.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|