Ken,
Most likely place to look after the flasher relay (little canister) is the
stop-turnsignal override relay (box with 4 terminals down each side).
It doesn't need to be dreaded, and usually responds very well to some
careful cleaning of the points sets with very fine emery, and checking the
point gap settings. It's all described very well in the workshop manual. One
the bench its very easy, getting it to the bench and back is the more
difficult matter.
Rich Chrysler
----- Original Message -----
From: "Ken Taplin" <ktaplin@prexar.com>
To: "healeys" <healeys@autox.team.net>
Sent: Wednesday, March 26, 2008 6:40 AM
Subject: [Healeys] wiring
> Finished the wiring on my BT7 and the turn signal indicator light stays
> on.
> Did I muddle something or should I suspect the dreaded flasher relay?
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as richchrysler@quickclic.net
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|