I have a BT7 w/ a 22% O'd and a 3.54 rear end. It also has a mild cam grind
(no lope). It won't pull if the engine is below 2000 RPM, but it is great
at 80 MPH.
John Snyder
>
> I am swapping tranmissions in my BN7. One coming out is a 22% side shift.
> The one going in is a 28% side shift and just rebuilt. Bundled with my
> 3.54 Lempert gear set should give me great cruising capabilities on
> demand.
>
> Question: the 22% has an enclosed area with a removable cover where the
> solenoid shaft engages and disengages the OD (to keep debris and moisture
> out, I assume) The 28% does not have this enclosure leaving it exposed to
> debris and moisture.
>
> The parts manual shows only a metal deflector (called a stone gaurd) in
> front of the solenoid. Is this correct? and is there a way to convert to
> the enclosed version, which seems safer in the long run?
>
> Thanks in advance,
>
> John Homonek
> Atlanta Chapter AHCA
> 1959 BN7
> 1960 AN5
> 1974 Jensen Healey
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> You are subscribed as helyjohn@cablespeed.com
>
> http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
http://www.team.net/archive
|