Hi Pieter,
There are differences in the thickness and the hub offset. I believe with a
bit of work on a lathe late discs can be machined to fit the early cars but
not the reverse.
Michael Salter
100 (1953)
AHX12 (1953)
Bugeye (1961)
http://www.netbug.net/blogmichael/
-----Original Message-----
From: healeys-bounces+msalter=precisionsportscar.com@autox.team.net
[mailto:healeys-bounces+msalter=precisionsportscar.com@autox.team.net] On
Behalf Of Pieter and Linda Scheenhouwer
Sent: November 22, 2007 2:50 AM
To: Healey List
Subject: [Healeys] disk brake sizes
Can anybody tell me the physical difference between BJ7 front rotors and the
later BJ8 rotors. I haven't got easy access to a BJ8 set but the catalogues
I am looking at seem to have the diameter/hat height the same so the only
difference could be in the thickness and the stud pattern,
Thanks again for any help,
Pieter
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|