Disconnect all the parts from the firewall leaving them all attached
the harness. The collect the harness and misc parts into a large
plastic bag. Then remove all the brake lines, insulation panels and
other misc parts then prep and paint.
David Nock
British Car Specialists
Stockton Ca 95205
209-948-8767
www.britishcarspecialists.com
.
.
On Nov 21, 2007, at 3:40 PM, Freese, Ken wrote:
> I have my engine back from the dyno. 160hp max at 5000 and 175 to 183
> ft-lb from somewhere under 2700 RPM to 4800. No oil leaks either.
> Of course my engine compartment is way to scruffy not to put the
> engine
> in.
> I just got a quart of paint mixed up in OE White and cut a new
> piece of
> firewall insulation. Any tips on masking the wiring harness and
> electrical components under the bonnet?
> Thanks,
> Ken Freese
> 65 BJ8
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|