The two W terminals feed the relay coil. They are interchangeable. They
were reversed on my car which appeared to have the original wiring.
HTH,
Peter Schauss
1963 BJ7
1980 MGB
> -----Original Message-----
> From: healeys-bounces+schauss=worldnet.att.net@autox.team.net
> [mailto:healeys-bounces+schauss=worldnet.att.net@autox.team.net] On Behalf
> Of James Shope
> Sent: Saturday, October 20, 2007 10:52 PM
> To: healeys
> Subject: [Healeys] o/d wiring
>
> bought a new od relay from sportand classic and found it is numbered
> different
> than what it shows in manual. this is the screw terminal type and it is
> numbered right to left with W1, C2,C3, and W3. i hooked the w/p wires to
> W1,
> w/g to C2, whites to C3, and ground wire to W3. book shows w/p to W2, w/g
> toC2, whites to C1 and ground to W1. before i hook the power wire to the
> fuse
> block, can anyone tell me if this is incorrect and what is correct. TIA,
> hjim
> _______________________________________________
> schauss@worldnet.att.net
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|