On the BN1, I fitted the County pump, but discovered the fan pulley
would not snug down to the pump without binding.
I thought I could live without tightening the nut too tight, with some
loctite applied to the threads, but NO, the car cannot live with that.
I've now taken the radiator out, again, to take the pump and pulley to
our local Healey mechanic.
Lou
BN1
San Diego AH Club
>>Folks,
>>
>>After 3,000 miles the County water pump in my 62 BT7 needs replacing. I'm
>>guessing the bearings are shot - it rumbles at 1000 rpm and I can wiggle
>>the fan blades (at 0 rpm) and watch the pulley rock.
>>
>>
>>Bob
>>_______________________________________________
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|