Thanks Bob, Alan, David,
I will look at all those suggestions. Bob when you say the adapter will look
incorrect relative to the block when it is installed correctly could be the
reason that the starter did not have enough room to come out. That little
slant that I believe you're talking about could be just enough to allow the
starter to pass by.
I'm going out right now to put things back together. Will let you know if I
need more help.
Thanks,
George> From: autofarm@cyg.net> To: haywoodone@hotmail.com> Subject: Re:
[Healeys] spin on oil filter with no oil in it upon removal> Date: Thu, 11 Oct
2007 10:26:59 -0400> > George, it sounds as though the spin on adaptor is on
upside down. The > holes will line up, but because of the non return valve in
the filter , it > wont allow oil to ciculate through the filter. The base
plate, when mounted > correctly, will look incorrect, relative to the block.
And the starter > should come off without removing the filter.>
Cheers.......Bob
_________________________________________________________________
Windows Live Hotmail and Microsoft Office Outlook together at last. Get it
now.
http://office.microsoft.com/en-us/outlook/HA102225181033.aspx?pid=CL100626971
033
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|