[demime 1.01d removed an attachment of type image/jpeg which had a name of
DSCN2701.jpg]
Dan
I also have a 62 BN7 Tri-carb
My rear carb jet head is inside the steering column about 1/4". With
no Choke, the bottom of the jet is about 3/16 above the CL of the
column. The attached pic. shows the Carb balance tube's alignment
with the OD throttle Switch. If thats OK It must be the stack up of
gaskets. spacers. heatshield.etc. All this is assuming mine is correct.
Good Luck
Dave and Daisy
[demime 1.01d removed an attachment of type image/jpeg which had a name of
DSCN2700.jpg]
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|