The water pump I recently fitted came from Dennis Welch - I don't know if it
was made by County. It had a tube fitted to connect direct to the hose.
However, I carefully turned the tube anticlockwise with some molegrips to find
that it was threaded into the pump body. The female thread in the pump body
fits the male thread on the heater tap. Might be worth seeing if yours is the
same?
Mike
Message: 9
Date: Mon, 3 Sep 2007 01:37:30 -0500
From: "Greg
Lemon" <glemon@neb.rr.com>
Subject: Re: [Healeys] County Brand (was Parts
comparisons)
To: "Alan Seigrist" <healey.nut@gmail.com>
Cc: HEALEY LIST
<healeys@autox.team.net>
Message-ID:
<059e01c7edf5$04e0cbc0$6401a8c0@toshibauser>
Content-Type: text/plain;
charset="us-ascii"
Alan is of course correct, although it would have been
nice if the County pump
had the threaded fitting for the (2nd) heater valve
instead of just a tube to
push the hose on.
Greg Lemon
54 BN1
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|