Carroll
As you can see by the pictures mine had also been broken off by the PO.
There was a hole but it didnt appear that the handle had been brazed or had
a thread, I managed to find a piece of 6mm approx? brass rod at work and
used a die for the thread and tapped out the existing hole, then rounded the
end on a grinding wheel, took about 10 minutes (and looks ok). I quess the
brass rod could be begged as this little amount is nothing (if you cannot
get any, send me your address and I will get you some, might take a few days
to come from the uk) I also replaced the spring with a bit of stainless
spring.
It beats paying the silly money for a new one.
Andy
_________________________________________________________________
Get Pimped! FREE emoticon packs from Windows Live -
http://www.pimpmylive.co.uk
[demime 1.01d removed an attachment of type image/pjpeg which had a name of
heatertap.JPG]
[demime 1.01d removed an attachment of type image/pjpeg which had a name of
heatertaprebuilt.JPG]
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|