Bill -
That screw is a chrome plated pozidrive oval head screw. There are
very few phillips screws on BJ8s, they are mostly pozidrive. If you
want to be original, it's best to find them used if you can. Usually
our UK suppliers will carry posidrive screws in stock. BCS should
have them too.
FYI you should never use a phillips screwdriver when working on your
BJ8. Go out and buy a nice set of POZI scredrivers and POZI bits -
phillips heads will ruin the pozi screws that came with your car.
Trust me, once you start using pozi screwdrivers with pozi screws, you
will never go back again to the lousy phillips screwdriver standard.
Best Regards,
Alan
On 8/12/07, wericars@aol.com <wericars@aol.com> wrote:
> Does anyone have a pic or description of the two screws and washers that
> attach the top of the center section of the MK III dash (the vinyl covered
> section)?to the fascia?? The parts book I have does not seem to list a part
> number.? The Moss catalogue?describes them as chrome and says?they are
> unavailable.? The captured nuts that they screw into are 10-32, but I don't
> know what the head is supposed to look like.? I am hoping they are oval head
> chrome phillips screws with finishing wahsers as I have those with british
> markings on the head of the screw.? But if wishes were horses....
>
>
> Bill
> Boston area
> 65 BJ8
>
> ________________________________________________________________________
> AOL now offers free email to everyone. Find out more about what's free from
> AOL at AOL.com.
> _______________________________________________
> healey.nut@gmail.com
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
--
Alan
'52 A90
'53 BN1
'64 BJ8
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|