Yes - The front cam retainer plate bears on the back side of the
sprocket, & the front shoulder of the cam to locate the cam fore &
aft. It should allow one or two thousandths end float. The cam comes
no where near the back plate.
Regards,
Dave Russell
BN2
Greg Lemon wrote:
is it simply the gasket and
> back plate that cover the hole for the camshaft in the back of the
> block? I am envisioning the end of the cam spinning against the
> gasket, but maybe there is some clearance there.
>
> Thanks, Greg Lemon 54 BN1
_______________________________________________
Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys
|