[Healeys] Kirk Header installation tip

["Freese, Ken" <Kendall.Freese@Aerojet.com>]

 Steve,
You may find that the slip joint leaks more than you would like initialy
or that the clamp is unsightly. I had mine welded in the car by a
muffler shop. I can still get the headers in and out of the car without
a problem.
I also ground the front corner of the intake manifold just a smidge and
blocked off the drain tube outlets on the manifold.
Ken Freese
65 BJ8
_______________________________________________

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys