healeys
[Top] [All Lists]

Re: [Healeys] Wiring harness, colour of the zinc plated fixing,

To: "John Loftus" <loftusdesign@cox.net>, <Josef.Eckert@t-systems.com>
Subject: Re: [Healeys] Wiring harness, colour of the zinc plated fixing,
From: "Rich C" <richchrysler@quickclic.net>
Date: Sun, 1 Jul 2007 10:13:39 -0400
Gentlemen,

We on the Concours Committee have researched this a lot and found the clips 
on all the Longbridge built cars, Hundreds and 100/Six's seemed to have a 
yellowish tint to them and were indeed shaped with semi circular ends. When 
scrubbed with anything even slightly abraisive, this yellow finish came off 
quite easily.
The clips on the later cars assembled at Abingdon seemed to all have a dull 
silvery finish and the ends were slightly arched but had sharp corners on 
them.

Rich Chrysler

----- Original Message ----- 
From: "John Loftus" <loftusdesign@cox.net>
To: <Josef.Eckert@t-systems.com>
Cc: <healeys@autox.team.net>
Sent: Thursday, June 28, 2007 2:41 PM
Subject: Re: [Healeys] Wiring harness, colour of the zinc plated 
fixing,clips


> Josef,
>
> According to the concours guidelines, the 100 clips were yellow zinc 
> plated with semi-circular ends. Early BN4's were all yellow zinc plated 
> with semi-circular ends. From late 100/6s onward the clips were clear 
> zinc-plate with arched ends (sharp corners where the arched ends meet the 
> straight sides).
>
> Cheers,
> John
> _______________________________________________
> richchrysler@quickclic.net
>
> Healeys@autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
_______________________________________________

Healeys@autox.team.net
http://autox.team.net/mailman/listinfo/healeys

<Prev in Thread] Current Thread [Next in Thread>
  • Re: [Healeys] Wiring harness, colour of the zinc plated fixing,, Rich C <=